When most people think of an HVAC technician, they think of a person that uses a list of highly technical tools. However, when you bring in the aid of one of these professionals to help you with your air conditioning replacement, you may be a little surprised at just how basic some of the tools will be that they bring along.
A reciprocating saw may be used to create openings where needed.
A reciprocating saw, which is often referred to as a saws-all, is a handheld saw with a narrow blade that can be used to cut through just about anything. During the process of running wires, pipes, and vents, the technician will reach for their reciprocating saw on several occasions. While the saw may not be needed as much if you have an old system being replaced because a lot of openings will already be in place, there can still be situations when a saw will be needed to run new connections.
A cordless drill will be used for various tasks during the AC installation.
You would be hard-pressed to find an HVAC technician that did not keep a good cordless drill and some fully charged batteries with them. The cordless drill is needed for all kinds of reasons during the replacement of an air conditioning system, such as:
- Drilling holes in floors or walls for wiring to slip through
- Tightening screws on the system as it is assembled
- Dismantling old hardware pieces from an old unit during the removal process
A good set of pliers will help the technician make connections and fish for wires.
Your good-old set of needle-nose pliers can serve a variety of purposes when a new air conditioner is being installed in a home. From reaching into small openings to grab a wire to tightening up small nuts and bolts on wiring harnesses, a good set of pliers is always a must.
A set of tin snips will be invaluable when dealing with ductwork.
In the process of installing new ductwork, the technician will have to make a lot of cuts. They will probably use the reciprocating saw to create openings in the flooring for vents, but when it comes to trimming ductwork lines, foil tape, and even vinyl flooring, a good pair of tin snips will make all the difference. Some HVAC technicians will have several pairs of tin snips in their tool belt, and some may even have a pair of tin shears as well.
For more information, speak with a professional who provides air conditioning replacement services.