Menu

tips for troubleshooting an air conditioning system


About Me

tips for troubleshooting an air conditioning system

You go to the thermostat and click the air conditioning on for the very first time of the season. You sit back and wait for the cool air to begin filling your home. What do you do when the cool air never starts? Is there anything you can check to get it working? If you are having troubles with your air conditioning system, take a moment to visit my website. Here, you will find a troubleshooting list that can help you pinpoint the problem and get your system working again. Hopefully, you will find everything you need to cool your home on the hot summer days.

Archive

Latest Posts

3 Common Repairs for a Gas Fireplace
28 October 2016

A fireplace warms your home and gives it character

Preparing Your Home For An AC Installation
6 October 2016

If your cooling costs are getting out of hand, it

Can't Get Comfortable Despite Running The Air Conditioner? Blame The Humidity
31 July 2016

Are you constantly readjusting the thermostat in y

4 Benefits Of Attic Fans: Should You Have One?
8 June 2016

Attic fans are beneficial to saving money on energ

Moving into a Home with Propane Heat for the First Time
16 May 2016

If you're moving into a home with a propane-based

How To Prepare For The Cold At The Last Minute

When the cold air starts to set in you need to be sure you have your home prepared so you and your family will be warm and comfortable during the winter months. If you find the cold weather is upon you and you didn't get your house winterized in time, there are some things you can quickly do in order to make sure you stay warm.

Check your furnace

The first thing you want to do is make sure your furnace is in good working order. You want to begin by taking your vacuum and using the hose end to clean the soot and debris out of the furnace. Using a wet/dry vacuum is the best choice if you have this option.

Take the covers off the registers and use the hose end of the vacuum to vacuum them out as well. This will prevent dust from blowing all over the house once you turn the furnace on. You also want to be sure you clean or replace the filter before you run the furnace. Otherwise, the furnace won't work as well at warming your house. This will also cause more wear and tear on the unit and it can lead to an increase in your monthly heating expenses.

If you hear any noises when you turn your furnace on or it isn't working how it should, then you want to call out a heating repair technician right away, like those found at http://www.alliedairheat.com. Once the cold comes they will be inundated with service and repair calls, so the sooner you call them the better off you will be.

Seal off any areas where air can come inside

Go around your house and make sure you seal off any areas where the cold air can come in and the heat can escape. Board up any doggy doors, put rolled up towels in the window sills and patch up any problematic holes or cracks. You also want to put rolled up towels in front of any doors that allow air to come in.

Use rugs and carpeting

If your home has hard flooring, then you should use scrap carpet and rugs on the floors to help keep the inside of your home warmer. Focus on the rooms your family spends the most time in. You can seal off any unused rooms so you trap the warmer air in the areas where you will be spending the most of your time.

Warm the house other ways if the furnace is broken

If the furnace isn't working and you're waiting for the technician, you want to use any alternate sources of heat. You can use a portable wood burning stove by setting it on a flame resistant surface and putting the piping out a window. You can also make an emergency heater by taking a clean paint can and putting a roll of toilet paper in it without the cardboard middle. Fill the can almost to the top of the toilet paper with isopropyl alcohol and light the toilet paper on fire. These things will help keep you warm until the technician arrives.